Sentinel |
Sentinel Sport Top |
Candidate |
Senator |
Senator Heavy Duty |
President |
The StarTrans Senator series meets your strictest driving demands. The strong fiberglass reinforced panel (FRP) sidewalls eliminate exterior noise and are extremely strong and rugged to battle difficult road conditions. The interior surfaces feature stain- and scratch-resistant surfaces for added durability.
StarTrans Senators are encased in a steel cage for optimal safety. And every weld is individually inspected to make sure we adhere to our own high quality standards and safety regulations.
SUBFLOORING: 12-gauge steel outriggers, fully welded with floor level Z rail, incorporated with chassis rubber ride capabilities.
FLOORING: 3/4" Marine grade plywood with .024 aluminum underbelly, undercoated. Floor covered with 1/8" transit rubber. Aluminum heat shield over chassis catalytic converter and muffler.
SIDEWALLS: 3/4" polyurethane foam insulation (R-6. 12) gelcoated to 1/4" FRP exterior with 1/4" FRP interior. Reinforced with steel perimeter and transverse supports. Completely fiberglassed to adjoining body parts to form a single unitized body.
ROOFING: One-piece FRP/wood core laminate roof with steel cage reinforcement.
WINDOWS: 24" x 34" T-slider, 31% tinted. Clamp ring-style radius windows. Egress windows installed to meet FMVSS 217 requirements. Operators curbside window AS-2 rated: upper & lower windows = 425 square inches visibility.
ENTRY: Spacious entrance (32" x 83" clear opening) with doors that operate manually. Door panels are Plexiglas-plated for the best possible drivers visibility. White step nosing and lighted stepwell standard. Entrance grab rail (left side).
LIGHTING: Each bus comes standard with six passenger courtesy lights.
ELECTRICAL: Wiring is color-coded with the number and function designated every 4" on the wire to enable identification and circuit traceability. Only premium components built to meet the Society of Automotive Engineers (S.A.E.) and Underwriter's Laboratories (U.L.) requirements are used. Electronic control console switch panel.
OPTIONAL A/C & HEAT: A/C systems ranging in size from 30,000 BTU to 88,000 BTU. Rear heat 40,000 BTU to 68,000 BTU.
OPTIONAL PARATRANSIT: Wheelchair accessibility with a wide range of securement systems and seating arrangements.
OPTIONAL LUGGAGE: Luggage can be stored in over-seat, floor-to-ceiling, rear compartments or custom-designed areas.
OPTIONAL SEATING: Forward-facing, perimeter-style and track seating are all available. Your choice of vinyl and cloth fabric in a wide range of colors.
- Bright white gelcoated body/choice of three standard striping packages.
- Stainless steel exterior mirrors: 6-1/2" x 9-1/2" with 5" convex mirror, on each side.
- Heavy-duty 10-gauge wraparound bumper with anti-ride cover.
- Mud flaps (front and rear).
- 12-month/unlimited mileage with five-year/75,000-mile warranty of body structure.
- Chevrolet 12,300 GVW cutaway
- Tinted glass
- Automatic transmission
- 4:10 rear axle ratio
- Power steering
- Power brakes
- Dash A/C and heater
- Super engine cooling
- Tilt steering & cruise control
- 350 cubic inch (Vortec 5700) or 454 cubic inch (Vortec 7400) and 6.5 liter turbo diesel V8
- 35 gallon fuel capacity
- Radial tires LT225-16 D
- Chrome front bumper with license plate bracket
- Comfort ride suspension: H.D. springs and shocks
- Read-out gauges
- Heavy-duty batteries
- 124 AMP alternator
- 139", 159" or 177" wheelbase
- GVWR 12,300 and 15,500 tag axle
- Exterior width: 96"
- Exterior height: 114"
- First step to ground: 11" second and third step riser: 9" max.
- Step tread depth: 9" max.
- Entrance clear opening: 32" x 83" min.
- Interior width at seat level: 92-1/2"
- Interior width up 36" from floor: 93-3/8"
- Center aisle height: 80"
- Flat floor aisle height: 75"
- Double wheelchair doors: 44-1/2" x 68"
- Rear luggage compartment: 141 cubic feet (standard)
Top ↑
Back →